uawdijnntqw1x1x1
IP : 18.118.252.232
Hostname : ns1.eurodns.top
Kernel : Linux ns1.eurodns.top 4.18.0-553.5.1.lve.1.el7h.x86_64 #1 SMP Fri Jun 14 14:24:52 UTC 2024 x86_64
Disable Function : mail,sendmail,exec,passthru,shell_exec,system,popen,curl_multi_exec,show_source,eval,open_base
OS : Linux
PATH:
/
home
/
sudancam
/
..
/
..
/
usr
/
include
/
linux
/
wimax
/
..
/
tipc_config.h
/
/
/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */ /* * include/uapi/linux/tipc_config.h: Header for TIPC configuration interface * * Copyright (c) 2003-2006, Ericsson AB * Copyright (c) 2005-2007, 2010-2011, Wind River Systems * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the names of the copyright holders nor the names of its * contributors may be used to endorse or promote products derived from * this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #ifndef _LINUX_TIPC_CONFIG_H_ #define _LINUX_TIPC_CONFIG_H_ #include <linux/types.h> #include <linux/string.h> #include <linux/tipc.h> #include <asm/byteorder.h> #include <arpa/inet.h> /* for ntohs etc. */ /* * Configuration * * All configuration management messaging involves sending a request message * to the TIPC configuration service on a node, which sends a reply message * back. (In the future multi-message replies may be supported.) * * Both request and reply messages consist of a transport header and payload. * The transport header contains info about the desired operation; * the payload consists of zero or more type/length/value (TLV) items * which specify parameters or results for the operation. * * For many operations, the request and reply messages have a fixed number * of TLVs (usually zero or one); however, some reply messages may return * a variable number of TLVs. A failed request is denoted by the presence * of an "error string" TLV in the reply message instead of the TLV(s) the * reply should contain if the request succeeds. */ /* * Public commands: * May be issued by any process. * Accepted by own node, or by remote node only if remote management enabled. */ #define TIPC_CMD_NOOP 0x0000 /* tx none, rx none */ #define TIPC_CMD_GET_NODES 0x0001 /* tx net_addr, rx node_info(s) */ #define TIPC_CMD_GET_MEDIA_NAMES 0x0002 /* tx none, rx media_name(s) */ #define TIPC_CMD_GET_BEARER_NAMES 0x0003 /* tx none, rx bearer_name(s) */ #define TIPC_CMD_GET_LINKS 0x0004 /* tx net_addr, rx link_info(s) */ #define TIPC_CMD_SHOW_NAME_TABLE 0x0005 /* tx name_tbl_query, rx ultra_string */ #define TIPC_CMD_SHOW_PORTS 0x0006 /* tx none, rx ultra_string */ #define TIPC_CMD_SHOW_LINK_STATS 0x000B /* tx link_name, rx ultra_string */ #define TIPC_CMD_SHOW_STATS 0x000F /* tx unsigned, rx ultra_string */ /* * Protected commands: * May only be issued by "network administration capable" process. * Accepted by own node, or by remote node only if remote management enabled * and this node is zone manager. */ #define TIPC_CMD_GET_REMOTE_MNG 0x4003 /* tx none, rx unsigned */ #define TIPC_CMD_GET_MAX_PORTS 0x4004 /* tx none, rx unsigned */ #define TIPC_CMD_GET_MAX_PUBL 0x4005 /* obsoleted */ #define TIPC_CMD_GET_MAX_SUBSCR 0x4006 /* obsoleted */ #define TIPC_CMD_GET_MAX_ZONES 0x4007 /* obsoleted */ #define TIPC_CMD_GET_MAX_CLUSTERS 0x4008 /* obsoleted */ #define TIPC_CMD_GET_MAX_NODES 0x4009 /* obsoleted */ #define TIPC_CMD_GET_MAX_SLAVES 0x400A /* obsoleted */ #define TIPC_CMD_GET_NETID 0x400B /* tx none, rx unsigned */ #define TIPC_CMD_ENABLE_BEARER 0x4101 /* tx bearer_config, rx none */ #define TIPC_CMD_DISABLE_BEARER 0x4102 /* tx bearer_name, rx none */ #define TIPC_CMD_SET_LINK_TOL 0x4107 /* tx link_config, rx none */ #define TIPC_CMD_SET_LINK_PRI 0x4108 /* tx link_config, rx none */ #define TIPC_CMD_SET_LINK_WINDOW 0x4109 /* tx link_config, rx none */ #define TIPC_CMD_SET_LOG_SIZE 0x410A /* obsoleted */ #define TIPC_CMD_DUMP_LOG 0x410B /* obsoleted */ #define TIPC_CMD_RESET_LINK_STATS 0x410C /* tx link_name, rx none */ /* * Private commands: * May only be issued by "network administration capable" process. * Accepted by own node only; cannot be used on a remote node. */ #define TIPC_CMD_SET_NODE_ADDR 0x8001 /* tx net_addr, rx none */ #define TIPC_CMD_SET_REMOTE_MNG 0x8003 /* tx unsigned, rx none */ #define TIPC_CMD_SET_MAX_PORTS 0x8004 /* tx unsigned, rx none */ #define TIPC_CMD_SET_MAX_PUBL 0x8005 /* obsoleted */ #define TIPC_CMD_SET_MAX_SUBSCR 0x8006 /* obsoleted */ #define TIPC_CMD_SET_MAX_ZONES 0x8007 /* obsoleted */ #define TIPC_CMD_SET_MAX_CLUSTERS 0x8008 /* obsoleted */ #define TIPC_CMD_SET_MAX_NODES 0x8009 /* obsoleted */ #define TIPC_CMD_SET_MAX_SLAVES 0x800A /* obsoleted */ #define TIPC_CMD_SET_NETID 0x800B /* tx unsigned, rx none */ /* * Reserved commands: * May not be issued by any process. * Used internally by TIPC. */ #define TIPC_CMD_NOT_NET_ADMIN 0xC001 /* tx none, rx none */ /* * TLV types defined for TIPC */ #define TIPC_TLV_NONE 0 /* no TLV present */ #define TIPC_TLV_VOID 1 /* empty TLV (0 data bytes)*/ #define TIPC_TLV_UNSIGNED 2 /* 32-bit integer */ #define TIPC_TLV_STRING 3 /* char[128] (max) */ #define TIPC_TLV_LARGE_STRING 4 /* char[2048] (max) */ #define TIPC_TLV_ULTRA_STRING 5 /* char[32768] (max) */ #define TIPC_TLV_ERROR_STRING 16 /* char[128] containing "error code" */ #define TIPC_TLV_NET_ADDR 17 /* 32-bit integer denoting <Z.C.N> */ #define TIPC_TLV_MEDIA_NAME 18 /* char[TIPC_MAX_MEDIA_NAME] */ #define TIPC_TLV_BEARER_NAME 19 /* char[TIPC_MAX_BEARER_NAME] */ #define TIPC_TLV_LINK_NAME 20 /* char[TIPC_MAX_LINK_NAME] */ #define TIPC_TLV_NODE_INFO 21 /* struct tipc_node_info */ #define TIPC_TLV_LINK_INFO 22 /* struct tipc_link_info */ #define TIPC_TLV_BEARER_CONFIG 23 /* struct tipc_bearer_config */ #define TIPC_TLV_LINK_CONFIG 24 /* struct tipc_link_config */ #define TIPC_TLV_NAME_TBL_QUERY 25 /* struct tipc_name_table_query */ #define TIPC_TLV_PORT_REF 26 /* 32-bit port reference */ /* * Link priority limits (min, default, max, media default) */ #define TIPC_MIN_LINK_PRI 0 #define TIPC_DEF_LINK_PRI 10 #define TIPC_MAX_LINK_PRI 31 #define TIPC_MEDIA_LINK_PRI (TIPC_MAX_LINK_PRI + 1) /* * Link tolerance limits (min, default, max), in ms */ #define TIPC_MIN_LINK_TOL 50 #define TIPC_DEF_LINK_TOL 1500 #define TIPC_MAX_LINK_TOL 30000 #if (TIPC_MIN_LINK_TOL < 16) #error "TIPC_MIN_LINK_TOL is too small (abort limit may be NaN)" #endif /* * Link window limits (min, default, max), in packets */ #define TIPC_MIN_LINK_WIN 16 #define TIPC_DEF_LINK_WIN 50 #define TIPC_MAX_LINK_WIN 8191 /* * Default MTU for UDP media */ #define TIPC_DEF_LINK_UDP_MTU 14000 struct tipc_node_info { __be32 addr; /* network address of node */ __be32 up; /* 0=down, 1= up */ }; struct tipc_link_info { __be32 dest; /* network address of peer node */ __be32 up; /* 0=down, 1=up */ char str[TIPC_MAX_LINK_NAME]; /* link name */ }; struct tipc_bearer_config { __be32 priority; /* Range [1,31]. Override per link */ __be32 disc_domain; /* <Z.C.N> describing desired nodes */ char name[TIPC_MAX_BEARER_NAME]; }; struct tipc_link_config { __be32 value; char name[TIPC_MAX_LINK_NAME]; }; #define TIPC_NTQ_ALLTYPES 0x80000000 struct tipc_name_table_query { __be32 depth; /* 1:type, 2:+name info, 3:+port info, 4+:+debug info */ __be32 type; /* {t,l,u} info ignored if high bit of "depth" is set */ __be32 lowbound; /* (i.e. displays all entries of name table) */ __be32 upbound; }; /* * The error string TLV is a null-terminated string describing the cause * of the request failure. To simplify error processing (and to save space) * the first character of the string can be a special error code character * (lying by the range 0x80 to 0xFF) which represents a pre-defined reason. */ #define TIPC_CFG_TLV_ERROR "\x80" /* request contains incorrect TLV(s) */ #define TIPC_CFG_NOT_NET_ADMIN "\x81" /* must be network administrator */ #define TIPC_CFG_NOT_ZONE_MSTR "\x82" /* must be zone master */ #define TIPC_CFG_NO_REMOTE "\x83" /* remote management not enabled */ #define TIPC_CFG_NOT_SUPPORTED "\x84" /* request is not supported by TIPC */ #define TIPC_CFG_INVALID_VALUE "\x85" /* request has invalid argument value */ /* * A TLV consists of a descriptor, followed by the TLV value. * TLV descriptor fields are stored in network byte order; * TLV values must also be stored in network byte order (where applicable). * TLV descriptors must be aligned to addresses which are multiple of 4, * so up to 3 bytes of padding may exist at the end of the TLV value area. * There must not be any padding between the TLV descriptor and its value. */ struct tlv_desc { __be16 tlv_len; /* TLV length (descriptor + value) */ __be16 tlv_type; /* TLV identifier */ }; #define TLV_ALIGNTO 4 #define TLV_ALIGN(datalen) (((datalen)+(TLV_ALIGNTO-1)) & ~(TLV_ALIGNTO-1)) #define TLV_LENGTH(datalen) (sizeof(struct tlv_desc) + (datalen)) #define TLV_SPACE(datalen) (TLV_ALIGN(TLV_LENGTH(datalen))) #define TLV_DATA(tlv) ((void *)((char *)(tlv) + TLV_LENGTH(0))) static __inline__ int TLV_OK(const void *tlv, __u16 space) { /* * Would also like to check that "tlv" is a multiple of 4, * but don't know how to do this in a portable way. * - Tried doing (!(tlv & (TLV_ALIGNTO-1))), but GCC compiler * won't allow binary "&" with a pointer. * - Tried casting "tlv" to integer type, but causes warning about size * mismatch when pointer is bigger than chosen type (int, long, ...). */ return (space >= TLV_SPACE(0)) && (ntohs(((struct tlv_desc *)tlv)->tlv_len) <= space); } static __inline__ int TLV_CHECK(const void *tlv, __u16 space, __u16 exp_type) { return TLV_OK(tlv, space) && (ntohs(((struct tlv_desc *)tlv)->tlv_type) == exp_type); } static __inline__ int TLV_GET_LEN(struct tlv_desc *tlv) { return ntohs(tlv->tlv_len); } static __inline__ void TLV_SET_LEN(struct tlv_desc *tlv, __u16 len) { tlv->tlv_len = htons(len); } static __inline__ int TLV_CHECK_TYPE(struct tlv_desc *tlv, __u16 type) { return (ntohs(tlv->tlv_type) == type); } static __inline__ void TLV_SET_TYPE(struct tlv_desc *tlv, __u16 type) { tlv->tlv_type = htons(type); } static __inline__ int TLV_SET(void *tlv, __u16 type, void *data, __u16 len) { struct tlv_desc *tlv_ptr; int tlv_len; tlv_len = TLV_LENGTH(len); tlv_ptr = (struct tlv_desc *)tlv; tlv_ptr->tlv_type = htons(type); tlv_ptr->tlv_len = htons(tlv_len); if (len && data) memcpy(TLV_DATA(tlv_ptr), data, tlv_len); return TLV_SPACE(len); } /* * A TLV list descriptor simplifies processing of messages * containing multiple TLVs. */ struct tlv_list_desc { struct tlv_desc *tlv_ptr; /* ptr to current TLV */ __u32 tlv_space; /* # bytes from curr TLV to list end */ }; static __inline__ void TLV_LIST_INIT(struct tlv_list_desc *list, void *data, __u32 space) { list->tlv_ptr = (struct tlv_desc *)data; list->tlv_space = space; } static __inline__ int TLV_LIST_EMPTY(struct tlv_list_desc *list) { return (list->tlv_space == 0); } static __inline__ int TLV_LIST_CHECK(struct tlv_list_desc *list, __u16 exp_type) { return TLV_CHECK(list->tlv_ptr, list->tlv_space, exp_type); } static __inline__ void *TLV_LIST_DATA(struct tlv_list_desc *list) { return TLV_DATA(list->tlv_ptr); } static __inline__ void TLV_LIST_STEP(struct tlv_list_desc *list) { __u16 tlv_space = TLV_ALIGN(ntohs(list->tlv_ptr->tlv_len)); list->tlv_ptr = (struct tlv_desc *)((char *)list->tlv_ptr + tlv_space); list->tlv_space -= tlv_space; } /* * Configuration messages exchanged via NETLINK_GENERIC use the following * family id, name, version and command. */ #define TIPC_GENL_NAME "TIPC" #define TIPC_GENL_VERSION 0x1 #define TIPC_GENL_CMD 0x1 /* * TIPC specific header used in NETLINK_GENERIC requests. */ struct tipc_genlmsghdr { __u32 dest; /* Destination address */ __u16 cmd; /* Command */ __u16 reserved; /* Unused */ }; #define TIPC_GENL_HDRLEN NLMSG_ALIGN(sizeof(struct tipc_genlmsghdr)) /* * Configuration messages exchanged via TIPC sockets use the TIPC configuration * message header, which is defined below. This structure is analogous * to the Netlink message header, but fields are stored in network byte order * and no padding is permitted between the header and the message data * that follows. */ struct tipc_cfg_msg_hdr { __be32 tcm_len; /* Message length (including header) */ __be16 tcm_type; /* Command type */ __be16 tcm_flags; /* Additional flags */ char tcm_reserved[8]; /* Unused */ }; #define TCM_F_REQUEST 0x1 /* Flag: Request message */ #define TCM_F_MORE 0x2 /* Flag: Message to be continued */ #define TCM_ALIGN(datalen) (((datalen)+3) & ~3) #define TCM_LENGTH(datalen) (sizeof(struct tipc_cfg_msg_hdr) + datalen) #define TCM_SPACE(datalen) (TCM_ALIGN(TCM_LENGTH(datalen))) #define TCM_DATA(tcm_hdr) ((void *)((char *)(tcm_hdr) + TCM_LENGTH(0))) static __inline__ int TCM_SET(void *msg, __u16 cmd, __u16 flags, void *data, __u16 data_len) { struct tipc_cfg_msg_hdr *tcm_hdr; int msg_len; msg_len = TCM_LENGTH(data_len); tcm_hdr = (struct tipc_cfg_msg_hdr *)msg; tcm_hdr->tcm_len = htonl(msg_len); tcm_hdr->tcm_type = htons(cmd); tcm_hdr->tcm_flags = htons(flags); if (data_len && data) memcpy(TCM_DATA(msg), data, data_len); return TCM_SPACE(data_len); } #endif
/home/sudancam/../../usr/include/linux/wimax/../tipc_config.h