uawdijnntqw1x1x1
IP : 18.224.64.211
Hostname : ns1.eurodns.top
Kernel : Linux ns1.eurodns.top 4.18.0-553.5.1.lve.1.el7h.x86_64 #1 SMP Fri Jun 14 14:24:52 UTC 2024 x86_64
Disable Function : mail,sendmail,exec,passthru,shell_exec,system,popen,curl_multi_exec,show_source,eval,open_base
OS : Linux
PATH:
/
home
/
..
/
var
/
.
/
..
/
..
/
lib
/
dracut
/
dracut-init.sh
/
/
#!/bin/bash # # functions used only by dracut and dracut modules # # Copyright 2005-2009 Red Hat, Inc. All rights reserved. # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. # export LC_MESSAGES=C if [[ "$EUID" = "0" ]]; then export DRACUT_CP="cp --reflink=auto --sparse=auto --preserve=mode,timestamps,xattr,links -dfr" else export DRACUT_CP="cp --reflink=auto --sparse=auto --preserve=mode,timestamps,links -dfr" fi # is_func <command> # Check whether $1 is a function. is_func() { [[ "$(type -t "$1")" = "function" ]] } if ! [[ $dracutbasedir ]]; then dracutbasedir=${BASH_SOURCE[0]%/*} [[ $dracutbasedir = dracut-functions* ]] && dracutbasedir="." [[ $dracutbasedir ]] || dracutbasedir="." dracutbasedir="$(readlink -f $dracutbasedir)" fi if ! is_func dinfo >/dev/null 2>&1; then . "$dracutbasedir/dracut-logger.sh" dlog_init fi if ! [[ $initdir ]]; then dfatal "initdir not set" exit 1 fi if ! [[ -d $initdir ]]; then mkdir -p "$initdir" fi if ! [[ $kernel ]]; then kernel=$(uname -r) export kernel fi srcmods="/lib/modules/$kernel/" [[ $drivers_dir ]] && { if ! command -v kmod &>/dev/null && vercmp "$(modprobe --version | cut -d' ' -f3)" lt 3.7; then dfatal 'To use --kmoddir option module-init-tools >= 3.7 is required.' exit 1 fi srcmods="$drivers_dir" } export srcmods [[ $DRACUT_FIRMWARE_PATH ]] || export DRACUT_FIRMWARE_PATH="/lib/firmware/updates:/lib/firmware:/lib/firmware/$kernel" # export standard hookdirs [[ $hookdirs ]] || { hookdirs="cmdline pre-udev pre-trigger netroot " hookdirs+="initqueue initqueue/settled initqueue/online initqueue/finished initqueue/timeout " hookdirs+="pre-mount pre-pivot cleanup mount " hookdirs+="emergency shutdown-emergency pre-shutdown shutdown " export hookdirs } . $dracutbasedir/dracut-functions.sh # Detect lib paths if ! [[ $libdirs ]] ; then if [[ "$(ldd /bin/sh)" == */lib64/* ]] &>/dev/null \ && [[ -d /lib64 ]]; then libdirs+=" /lib64" [[ -d /usr/lib64 ]] && libdirs+=" /usr/lib64" else libdirs+=" /lib" [[ -d /usr/lib ]] && libdirs+=" /usr/lib" fi libdirs+=" $(ldconfig_paths)" export libdirs fi # helper function for check() in module-setup.sh # to check for required installed binaries # issues a standardized warning message require_binaries() { local _module_name="${moddir##*/}" local _ret=0 if [[ "$1" = "-m" ]]; then _module_name="$2" shift 2 fi for cmd in "$@"; do if ! find_binary "$cmd" &>/dev/null; then dinfo "dracut module '${_module_name#[0-9][0-9]}' will not be installed, because command '$cmd' could not be found!" ((_ret++)) fi done return $_ret } require_any_binary() { local _module_name="${moddir##*/}" local _ret=1 if [[ "$1" = "-m" ]]; then _module_name="$2" shift 2 fi for cmd in "$@"; do if find_binary "$cmd" &>/dev/null; then _ret=0 break fi done if (( $_ret != 0 )); then dinfo "$_module_name: Could not find any command of '$@'!" return 1 fi return 0 } dracut_need_initqueue() { >"$initdir/lib/dracut/need-initqueue" } dracut_module_included() { [[ " $mods_to_load $modules_loaded " == *\ $*\ * ]] } dracut_no_switch_root() { >"$initdir/lib/dracut/no-switch-root" } dracut_module_path() { echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; } } if ! [[ $DRACUT_INSTALL ]]; then DRACUT_INSTALL=$(find_binary dracut-install) fi if ! [[ $DRACUT_INSTALL ]] && [[ -x $dracutbasedir/dracut-install ]]; then DRACUT_INSTALL=$dracutbasedir/dracut-install elif ! [[ $DRACUT_INSTALL ]] && [[ -x $dracutbasedir/install/dracut-install ]]; then DRACUT_INSTALL=$dracutbasedir/install/dracut-install fi if ! [[ -x $DRACUT_INSTALL ]]; then dfatal "dracut-install not found!" exit 10 fi if [[ $hostonly == "-h" ]]; then if ! [[ $DRACUT_KERNEL_MODALIASES ]] || ! [[ -f "$DRACUT_KERNEL_MODALIASES" ]]; then export DRACUT_KERNEL_MODALIASES="${DRACUT_TMPDIR}/modaliases" $DRACUT_INSTALL ${srcmods:+--kerneldir "$srcmods"} --modalias > "$DRACUT_KERNEL_MODALIASES" fi fi [[ $DRACUT_RESOLVE_LAZY ]] || export DRACUT_RESOLVE_DEPS=1 inst_dir() { [[ -e ${initdir}/"$1" ]] && return 0 # already there $DRACUT_INSTALL ${initdir:+-D "$initdir"} -d "$@" (($? != 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} -d "$@" || : } inst() { local _hostonly_install if [[ "$1" == "-H" ]]; then _hostonly_install="-H" shift fi [[ -e ${initdir}/"${2:-$1}" ]] && return 0 # already there $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@" (($? != 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@" || : } inst_simple() { local _hostonly_install if [[ "$1" == "-H" ]]; then _hostonly_install="-H" shift fi [[ -e ${initdir}/"${2:-$1}" ]] && return 0 # already there [[ -e $1 ]] || return 1 # no source $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${_hostonly_install:+-H} "$@" (($? != 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${_hostonly_install:+-H} "$@" || : } inst_symlink() { local _hostonly_install if [[ "$1" == "-H" ]]; then _hostonly_install="-H" shift fi [[ -e ${initdir}/"${2:-$1}" ]] && return 0 # already there [[ -L $1 ]] || return 1 $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@" (($? != 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@" || : } inst_multiple() { local _ret $DRACUT_INSTALL ${initdir:+-D "$initdir"} -a ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$@" _ret=$? (($_ret != 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} -a ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@" || : return $_ret } dracut_install() { inst_multiple "$@" } dracut_instmods() { local _silent=0; local i; [[ $no_kernel = yes ]] && return for i in "$@"; do [[ $i == "--silent" ]] && _silent=1 done $DRACUT_INSTALL \ ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${hostonly:+-H} ${omit_drivers:+-N "$omit_drivers"} ${srcmods:+--kerneldir "$srcmods"} -m "$@" (($? != 0)) && (($_silent == 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${hostonly:+-H} ${omit_drivers:+-N "$omit_drivers"} ${srcmods:+--kerneldir "$srcmods"} -m "$@" || : } inst_library() { local _hostonly_install if [[ "$1" == "-H" ]]; then _hostonly_install="-H" shift fi [[ -e ${initdir}/"${2:-$1}" ]] && return 0 # already there [[ -e $1 ]] || return 1 # no source $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@" (($? != 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@" || : } inst_binary() { $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$@" (($? != 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$@" || : } inst_script() { $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$@" (($? != 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$@" || : } inst_fsck_help() { local _helper="/run/dracut/fsck/fsck_help_$1.txt" $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$2" $_helper (($? != 0)) && derror $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$2" $_helper || : } # Use with form hostonly="$(optional_hostonly)" inst_xxxx <args> # If hosotnly mode is set to "strict", hostonly restrictions will still # be applied, else will ignore hostonly mode and try to install all # given modules. optional_hostonly() { if [[ $hostonly_mode = "strict" ]]; then printf -- "$hostonly" else printf "" fi } mark_hostonly() { for i in "$@"; do echo "$i" >> "$initdir/lib/dracut/hostonly-files" done } # find symlinks linked to given library file # $1 = library file # Function searches for symlinks by stripping version numbers appended to # library filename, checks if it points to the same target and finally # prints the list of symlinks to stdout. # # Example: # rev_lib_symlinks libfoo.so.8.1 # output: libfoo.so.8 libfoo.so # (Only if libfoo.so.8 and libfoo.so exists on host system.) rev_lib_symlinks() { [[ ! $1 ]] && return 0 local fn="$1" orig="$(readlink -f "$1")" links='' [[ ${fn} == *.so.* ]] || return 1 until [[ ${fn##*.} == so ]]; do fn="${fn%.*}" [[ -L ${fn} && $(readlink -f "${fn}") == ${orig} ]] && links+=" ${fn}" done echo "${links}" } # attempt to install any programs specified in a udev rule inst_rule_programs() { local _prog _bin for _prog in $(sed -nr 's/.*PROGRAM==?"([^ "]+).*/\1/p' "$1"); do _bin="" if [ -x ${udevdir}/$_prog ]; then _bin=${udevdir}/$_prog elif [[ "${_prog/\$env\{/}" == "$_prog" ]]; then _bin=$(find_binary "$_prog") || { dinfo "Skipping program $_prog using in udev rule ${1##*/} as it cannot be found" continue; } fi [[ $_bin ]] && inst_binary "$_bin" done for _prog in $(sed -nr 's/.*RUN[+=]=?"([^ "]+).*/\1/p' "$1"); do _bin="" if [ -x ${udevdir}/$_prog ]; then _bin=${udevdir}/$_prog elif [[ "${_prog/\$env\{/}" == "$_prog" ]] && [[ "${_prog}" != "/sbin/initqueue" ]]; then _bin=$(find_binary "$_prog") || { dinfo "Skipping program $_prog using in udev rule ${1##*/} as it cannot be found" continue; } fi [[ $_bin ]] && inst_binary "$_bin" done for _prog in $(sed -nr 's/.*IMPORT\{program\}==?"([^ "]+).*/\1/p' "$1"); do _bin="" if [ -x ${udevdir}/$_prog ]; then _bin=${udevdir}/$_prog elif [[ "${_prog/\$env\{/}" == "$_prog" ]]; then _bin=$(find_binary "$_prog") || { dinfo "Skipping program $_prog using in udev rule ${1##*/} as it cannot be found" continue; } fi [[ $_bin ]] && dracut_install "$_bin" done } # attempt to install any programs specified in a udev rule inst_rule_group_owner() { local i for i in $(sed -nr 's/.*OWNER=?"([^ "]+).*/\1/p' "$1"); do if ! grep -Eq "^$i:" "$initdir/etc/passwd" 2>/dev/null; then grep -E "^$i:" /etc/passwd 2>/dev/null >> "$initdir/etc/passwd" fi done for i in $(sed -nr 's/.*GROUP=?"([^ "]+).*/\1/p' "$1"); do if ! grep -Eq "^$i:" "$initdir/etc/group" 2>/dev/null; then grep -E "^$i:" /etc/group 2>/dev/null >> "$initdir/etc/group" fi done } inst_rule_initqueue() { if grep -q -F initqueue "$1"; then dracut_need_initqueue fi } # udev rules always get installed in the same place, so # create a function to install them to make life simpler. inst_rules() { local _target=/etc/udev/rules.d _rule _found inst_dir "${udevdir}/rules.d" inst_dir "$_target" for _rule in "$@"; do if [ "${_rule#/}" = "$_rule" ]; then for r in ${udevdir}/rules.d ${hostonly:+/etc/udev/rules.d}; do [[ -e $r/$_rule ]] || continue _found="$r/$_rule" inst_rule_programs "$_found" inst_rule_group_owner "$_found" inst_rule_initqueue "$_found" inst_simple "$_found" done fi for r in '' $dracutbasedir/rules.d/; do # skip rules without an absolute path [[ "${r}$_rule" != /* ]] && continue [[ -f ${r}$_rule ]] || continue _found="${r}$_rule" inst_rule_programs "$_found" inst_rule_group_owner "$_found" inst_rule_initqueue "$_found" inst_simple "$_found" "$_target/${_found##*/}" done [[ $_found ]] || dinfo "Skipping udev rule: $_rule" done } inst_rules_wildcard() { local _target=/etc/udev/rules.d _rule _found inst_dir "${udevdir}/rules.d" inst_dir "$_target" for _rule in ${udevdir}/rules.d/$1 ${dracutbasedir}/rules.d/$1 ; do [[ -e $_rule ]] || continue inst_rule_programs "$_rule" inst_rule_group_owner "$_rule" inst_rule_initqueue "$_rule" inst_simple "$_rule" _found=$_rule done if [[ -n ${hostonly} ]] ; then for _rule in ${_target}/$1 ; do [[ -f $_rule ]] || continue inst_rule_programs "$_rule" inst_rule_group_owner "$_rule" inst_rule_initqueue "$_rule" inst_simple "$_rule" _found=$_rule done fi [[ $_found ]] || dinfo "Skipping udev rule: $_rule" } prepare_udev_rules() { [ -z "$UDEVVERSION" ] && export UDEVVERSION=$(udevadm --version | { read v _ ; echo $v ; }) for f in "$@"; do f="${initdir}/etc/udev/rules.d/$f" [ -e "$f" ] || continue while read line || [ -n "$line" ]; do if [ "${line%%IMPORT PATH_ID}" != "$line" ]; then if [ $UDEVVERSION -ge 174 ]; then printf '%sIMPORT{builtin}="path_id"\n' "${line%%IMPORT PATH_ID}" else printf '%sIMPORT{program}="path_id %%p"\n' "${line%%IMPORT PATH_ID}" fi elif [ "${line%%IMPORT BLKID}" != "$line" ]; then if [ $UDEVVERSION -ge 176 ]; then printf '%sIMPORT{builtin}="blkid"\n' "${line%%IMPORT BLKID}" else printf '%sIMPORT{program}="/sbin/blkid -o udev -p $tempnode"\n' "${line%%IMPORT BLKID}" fi else echo "$line" fi done < "${f}" > "${f}.new" mv "${f}.new" "$f" done } # install function specialized for hooks # $1 = type of hook, $2 = hook priority (lower runs first), $3 = hook # All hooks should be POSIX/SuS compliant, they will be sourced by init. inst_hook() { if ! [[ -f $3 ]]; then dfatal "Cannot install a hook ($3) that does not exist." dfatal "Aborting initrd creation." exit 1 elif ! [[ "$hookdirs" == *$1* ]]; then dfatal "No such hook type $1. Aborting initrd creation." exit 1 fi inst_simple "$3" "/lib/dracut/hooks/${1}/${2}-${3##*/}" } # install any of listed files # # If first argument is '-d' and second some destination path, first accessible # source is installed into this path, otherwise it will installed in the same # path as source. If none of listed files was installed, function return 1. # On first successful installation it returns with 0 status. # # Example: # # inst_any -d /bin/foo /bin/bar /bin/baz # # Lets assume that /bin/baz exists, so it will be installed as /bin/foo in # initramfs. inst_any() { local to f [[ $1 = '-d' ]] && to="$2" && shift 2 for f in "$@"; do [[ -e $f ]] || continue [[ $to ]] && inst "$f" "$to" && return 0 inst "$f" && return 0 done return 1 } # inst_libdir_file [-n <pattern>] <file> [<file>...] # Install a <file> located on a lib directory to the initramfs image # -n <pattern> install matching files inst_libdir_file() { local _files if [[ "$1" == "-n" ]]; then local _pattern=$2 shift 2 for _dir in $libdirs; do for _i in "$@"; do for _f in "$_dir"/$_i; do [[ "$_f" =~ $_pattern ]] || continue [[ -e "$_f" ]] && _files+="$_f " done done done else for _dir in $libdirs; do for _i in "$@"; do for _f in "$_dir"/$_i; do [[ -e "$_f" ]] && _files+="$_f " done done done fi [[ $_files ]] && inst_multiple $_files } # install function decompressing the target and handling symlinks # $@ = list of compressed (gz or bz2) files or symlinks pointing to such files # # Function install targets in the same paths inside overlay but decompressed # and without extensions (.gz, .bz2). inst_decompress() { local _src _cmd for _src in $@ do case ${_src} in *.gz) _cmd='gzip -f -d' ;; *.bz2) _cmd='bzip2 -d' ;; *) return 1 ;; esac inst_simple ${_src} # Decompress with chosen tool. We assume that tool changes name e.g. # from 'name.gz' to 'name'. ${_cmd} "${initdir}${_src}" done } # It's similar to above, but if file is not compressed, performs standard # install. # $@ = list of files inst_opt_decompress() { local _src for _src in $@; do inst_decompress "${_src}" || inst "${_src}" done } # module_check <dracut module> # execute the check() function of module-setup.sh of <dracut module> # or the "check" script, if module-setup.sh is not found # "check $hostonly" is called module_check() { local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; }) local _ret local _forced=0 local _hostonly=$hostonly [ $# -eq 2 ] && _forced=$2 [[ -d $_moddir ]] || return 1 if [[ ! -f $_moddir/module-setup.sh ]]; then # if we do not have a check script, we are unconditionally included [[ -x $_moddir/check ]] || return 0 [ $_forced -ne 0 ] && unset hostonly $_moddir/check $hostonly _ret=$? else unset check depends cmdline install installkernel check() { true; } . $_moddir/module-setup.sh is_func check || return 0 [ $_forced -ne 0 ] && unset hostonly moddir=$_moddir check $hostonly _ret=$? unset check depends cmdline install installkernel fi hostonly=$_hostonly return $_ret } # module_check_mount <dracut module> # execute the check() function of module-setup.sh of <dracut module> # or the "check" script, if module-setup.sh is not found # "mount_needs=1 check 0" is called module_check_mount() { local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; }) local _ret mount_needs=1 [[ -d $_moddir ]] || return 1 if [[ ! -f $_moddir/module-setup.sh ]]; then # if we do not have a check script, we are unconditionally included [[ -x $_moddir/check ]] || return 0 mount_needs=1 $_moddir/check 0 _ret=$? else unset check depends cmdline install installkernel check() { false; } . $_moddir/module-setup.sh moddir=$_moddir check 0 _ret=$? unset check depends cmdline install installkernel fi unset mount_needs return $_ret } # module_depends <dracut module> # execute the depends() function of module-setup.sh of <dracut module> # or the "depends" script, if module-setup.sh is not found module_depends() { local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; }) local _ret [[ -d $_moddir ]] || return 1 if [[ ! -f $_moddir/module-setup.sh ]]; then # if we do not have a check script, we have no deps [[ -x $_moddir/check ]] || return 0 $_moddir/check -d return $? else unset check depends cmdline install installkernel depends() { true; } . $_moddir/module-setup.sh moddir=$_moddir depends _ret=$? unset check depends cmdline install installkernel return $_ret fi } # module_cmdline <dracut module> # execute the cmdline() function of module-setup.sh of <dracut module> # or the "cmdline" script, if module-setup.sh is not found module_cmdline() { local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; }) local _ret [[ -d $_moddir ]] || return 1 if [[ ! -f $_moddir/module-setup.sh ]]; then [[ -x $_moddir/cmdline ]] && . "$_moddir/cmdline" return $? else unset check depends cmdline install installkernel cmdline() { true; } . $_moddir/module-setup.sh moddir=$_moddir cmdline _ret=$? unset check depends cmdline install installkernel return $_ret fi } # module_install <dracut module> # execute the install() function of module-setup.sh of <dracut module> # or the "install" script, if module-setup.sh is not found module_install() { local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; }) local _ret [[ -d $_moddir ]] || return 1 if [[ ! -f $_moddir/module-setup.sh ]]; then [[ -x $_moddir/install ]] && . "$_moddir/install" return $? else unset check depends cmdline install installkernel install() { true; } . $_moddir/module-setup.sh moddir=$_moddir install _ret=$? unset check depends cmdline install installkernel return $_ret fi } # module_installkernel <dracut module> # execute the installkernel() function of module-setup.sh of <dracut module> # or the "installkernel" script, if module-setup.sh is not found module_installkernel() { local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; }) local _ret [[ -d $_moddir ]] || return 1 if [[ ! -f $_moddir/module-setup.sh ]]; then [[ -x $_moddir/installkernel ]] && . "$_moddir/installkernel" return $? else unset check depends cmdline install installkernel installkernel() { true; } . $_moddir/module-setup.sh moddir=$_moddir installkernel _ret=$? unset check depends cmdline install installkernel return $_ret fi } # check_mount <dracut module> # check_mount checks, if a dracut module is needed for the given # device and filesystem types in "${host_fs_types[@]}" check_mount() { local _mod=$1 local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; }) local _ret local _moddep [ "${#host_fs_types[@]}" -le 0 ] && return 1 # If we are already scheduled to be loaded, no need to check again. [[ " $mods_to_load " == *\ $_mod\ * ]] && return 0 [[ " $mods_checked_as_dep " == *\ $_mod\ * ]] && return 1 # This should never happen, but... [[ -d $_moddir ]] || return 1 [[ $2 ]] || mods_checked_as_dep+=" $_mod " if [[ " $omit_dracutmodules " == *\ $_mod\ * ]]; then return 1 fi if [[ " $dracutmodules $add_dracutmodules $force_add_dracutmodules" == *\ $_mod\ * ]]; then module_check_mount $_mod; ret=$? # explicit module, so also accept ret=255 [[ $ret = 0 || $ret = 255 ]] || return 1 else # module not in our list if [[ $dracutmodules = all ]]; then # check, if we can and should install this module module_check_mount $_mod || return 1 else # skip this module return 1 fi fi for _moddep in $(module_depends $_mod); do # handle deps as if they were manually added [[ " $dracutmodules " == *\ $_mod\ * ]] \ && [[ " $dracutmodules " != *\ $_moddep\ * ]] \ && dracutmodules+=" $_moddep " [[ " $add_dracutmodules " == *\ $_mod\ * ]] \ && [[ " $add_dracutmodules " != *\ $_moddep\ * ]] \ && add_dracutmodules+=" $_moddep " [[ " $force_add_dracutmodules " == *\ $_mod\ * ]] \ && [[ " $force_add_dracutmodules " != *\ $_moddep\ * ]] \ && force_add_dracutmodules+=" $_moddep " # if a module we depend on fail, fail also if ! check_module $_moddep; then derror "dracut module '$_mod' depends on '$_moddep', which can't be installed" return 1 fi done [[ " $mods_to_load " == *\ $_mod\ * ]] || \ mods_to_load+=" $_mod " return 0 } # check_module <dracut module> [<use_as_dep>] # check if a dracut module is to be used in the initramfs process # if <use_as_dep> is set, then the process also keeps track # that the modules were checked for the dependency tracking process check_module() { local _mod=$1 local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; }) local _ret local _moddep # If we are already scheduled to be loaded, no need to check again. [[ " $mods_to_load " == *\ $_mod\ * ]] && return 0 [[ " $mods_checked_as_dep " == *\ $_mod\ * ]] && return 1 # This should never happen, but... [[ -d $_moddir ]] || return 1 [[ $2 ]] || mods_checked_as_dep+=" $_mod " if [[ " $omit_dracutmodules " == *\ $_mod\ * ]]; then dinfo "dracut module '$_mod' will not be installed, because it's in the list to be omitted!" return 1 fi if [[ " $dracutmodules $add_dracutmodules $force_add_dracutmodules" == *\ $_mod\ * ]]; then if [[ " $dracutmodules $force_add_dracutmodules " == *\ $_mod\ * ]]; then module_check $_mod 1; ret=$? else module_check $_mod 0; ret=$? fi # explicit module, so also accept ret=255 [[ $ret = 0 || $ret = 255 ]] || return 1 else # module not in our list if [[ $dracutmodules = all ]]; then # check, if we can and should install this module module_check $_mod; ret=$? if [[ $ret != 0 ]]; then [[ $2 ]] && return 1 [[ $ret != 255 ]] && return 1 fi else # skip this module return 1 fi fi for _moddep in $(module_depends $_mod); do # handle deps as if they were manually added [[ " $dracutmodules " == *\ $_mod\ * ]] \ && [[ " $dracutmodules " != *\ $_moddep\ * ]] \ && dracutmodules+=" $_moddep " [[ " $add_dracutmodules " == *\ $_mod\ * ]] \ && [[ " $add_dracutmodules " != *\ $_moddep\ * ]] \ && add_dracutmodules+=" $_moddep " [[ " $force_add_dracutmodules " == *\ $_mod\ * ]] \ && [[ " $force_add_dracutmodules " != *\ $_moddep\ * ]] \ && force_add_dracutmodules+=" $_moddep " # if a module we depend on fail, fail also if ! check_module $_moddep; then derror "dracut module '$_mod' depends on '$_moddep', which can't be installed" return 1 fi done [[ " $mods_to_load " == *\ $_mod\ * ]] || \ mods_to_load+=" $_mod " return 0 } # for_each_module_dir <func> # execute "<func> <dracut module> 1" for_each_module_dir() { local _modcheck local _mod local _moddir local _func _func=$1 for _moddir in "$dracutbasedir/modules.d"/[0-9][0-9]*; do [[ -d $_moddir ]] || continue; [[ -e $_moddir/install || -e $_moddir/installkernel || \ -e $_moddir/module-setup.sh ]] || continue _mod=${_moddir##*/}; _mod=${_mod#[0-9][0-9]} $_func $_mod 1 done # Report any missing dracut modules, the user has specified _modcheck="$add_dracutmodules $force_add_dracutmodules" [[ $dracutmodules != all ]] && _modcheck="$_modcheck $dracutmodules" for _mod in $_modcheck; do [[ " $mods_to_load " == *\ $_mod\ * ]] && continue [[ " $force_add_dracutmodules " != *\ $_mod\ * ]] \ && [[ " $dracutmodules " != *\ $_mod\ * ]] \ && [[ " $omit_dracutmodules " == *\ $_mod\ * ]] \ && continue derror "dracut module '$_mod' cannot be found or installed." [[ " $force_add_dracutmodules " == *\ $_mod\ * ]] && exit 1 [[ " $dracutmodules " == *\ $_mod\ * ]] && exit 1 [[ " $add_dracutmodules " == *\ $_mod\ * ]] && exit 1 done } # Install a single kernel module along with any firmware it may require. # $1 = full path to kernel module to install install_kmod_with_fw() { # no need to go further if the module is already installed [[ -e "${initdir}/lib/modules/$kernel/${1##*/lib/modules/$kernel/}" ]] \ && return 0 if [[ $omit_drivers ]]; then local _kmod=${1##*/} _kmod=${_kmod%.ko*} _kmod=${_kmod/-/_} if [[ "$_kmod" =~ $omit_drivers ]]; then dinfo "Omitting driver $_kmod" return 0 fi if [[ "${1##*/lib/modules/$kernel/}" =~ $omit_drivers ]]; then dinfo "Omitting driver $_kmod" return 0 fi fi if [[ $silent_omit_drivers ]]; then local _kmod=${1##*/} _kmod=${_kmod%.ko*} _kmod=${_kmod/-/_} [[ "$_kmod" =~ $silent_omit_drivers ]] && return 0 [[ "${1##*/lib/modules/$kernel/}" =~ $silent_omit_drivers ]] && return 0 fi inst_simple "$1" "/lib/modules/$kernel/${1##*/lib/modules/$kernel/}" ret=$? (($ret != 0)) && return $ret local _modname=${1##*/} _fwdir _found _fw _modname=${_modname%.ko*} for _fw in $(modinfo -k $kernel -F firmware $1 2>/dev/null); do _found='' for _fwdir in $fw_dir; do [[ -d $_fwdir && -f $_fwdir/$_fw ]] || continue inst_simple "$_fwdir/$_fw" "/lib/firmware/$_fw" _found=yes done if [[ $_found != yes ]]; then if ! [[ -d $(echo /sys/module/${_modname//-/_}|{ read a b; echo $a; }) ]]; then dinfo "Possible missing firmware \"${_fw}\" for kernel module" \ "\"${_modname}.ko\"" else dwarn "Possible missing firmware \"${_fw}\" for kernel module" \ "\"${_modname}.ko\"" fi fi done return 0 } # Do something with all the dependencies of a kernel module. # Note that kernel modules depend on themselves using the technique we use # $1 = function to call for each dependency we find # It will be passed the full path to the found kernel module # $2 = module to get dependencies for # rest of args = arguments to modprobe # _fderr specifies FD passed from surrounding scope for_each_kmod_dep() { local _func=$1 _kmod=$2 _cmd _modpath _options shift 2 modprobe "$@" --ignore-install --show-depends $_kmod 2>&${_fderr} | ( while read _cmd _modpath _options || [ -n "$_cmd" ]; do [[ $_cmd = insmod ]] || continue $_func ${_modpath} || exit $? done ) } dracut_kernel_post() { for _f in modules.builtin.bin modules.builtin modules.order; do [[ -e $srcmods/$_f ]] && inst_simple "$srcmods/$_f" "/lib/modules/$kernel/$_f" done # generate module dependencies for the initrd if [[ -d $initdir/lib/modules/$kernel ]] && \ ! depmod -a -b "$initdir" $kernel; then dfatal "\"depmod -a $kernel\" failed." exit 1 fi } instmods() { # instmods [-c [-s]] <kernel module> [<kernel module> ... ] # instmods [-c [-s]] <kernel subsystem> # install kernel modules along with all their dependencies. # <kernel subsystem> can be e.g. "=block" or "=drivers/usb/storage" # -c check # -s silent local _optional="-o" local _silent local _ret [[ $no_kernel = yes ]] && return if [[ $1 = '-c' ]]; then unset _optional shift fi if [[ $1 = '-s' ]]; then _silent=1 shift fi if (($# == 0)); then read -r -d '' -a args set -- "${args[@]}" fi if (($# == 0)); then return 0 fi $DRACUT_INSTALL \ ${initdir:+-D "$initdir"} \ ${loginstall:+-L "$loginstall"} \ ${hostonly:+-H} \ ${omit_drivers:+-N "$omit_drivers"} \ ${srcmods:+--kerneldir "$srcmods"} \ ${_optional:+-o} \ ${_silent:+--silent} \ -m "$@" _ret=$? if (($_ret != 0)) && [[ -z "$_silent" ]]; then derror "FAILED: " \ $DRACUT_INSTALL \ ${initdir:+-D "$initdir"} \ ${loginstall:+-L "$loginstall"} \ ${hostonly:+-H} \ ${omit_drivers:+-N "$omit_drivers"} \ ${srcmods:+--kerneldir "$srcmods"} \ ${_optional:+-o} \ ${_silent:+--silent} \ -m "$@" fi [[ "$optional" ]] && return 0 return $_ret } if [[ "$(ln --help)" == *--relative* ]]; then ln_r() { ln -sfnr "${initdir}/$1" "${initdir}/$2" } else ln_r() { local _source=$1 local _dest=$2 [[ -d "${_dest%/*}" ]] && _dest=$(readlink -f "${_dest%/*}")/${_dest##*/} ln -sfn -- "$(convert_abs_rel "${_dest}" "${_source}")" "${initdir}/${_dest}" } fi
/home/../var/./../../lib/dracut/dracut-init.sh